Lithium Phosphate Battery

Lithium Phosphate Battery
Details:
Rated Voltage: 72-80VV
Rated Capacity: 300Ah
Power Capacity: 21.6kWh
Communication Management: RS485,CAN
Terminals: Anderson connector
IP Rating: IP67
Lithium Type: LiFePO4












Send Inquiry
Description
Send Inquiry

 

 

 

 

Features

 

With core advantages such as high energy density, long cycle life, low self-discharge, and high cell voltage, lithium batteries have become the mainstream choice in consumer electronics, new energy vehicles, energy storage and other fields. Their overall performance is significantly better than traditional batteries such as lead-acid and nickel-metal hydride.

 

Main Parameters

 
Project Specification Remark
Battery Type

LiFePO4

LiFePO4

Nominal capacity

300Ah

0.2C-0.5C standard discharge battery pack capacity
Nominal voltage

72V

23S1P

Working voltage

57.5V-83.95V

Charging and discharging, working voltage control range
Charge cut-off voltage

83.95V

Charge to the cut-off voltage with a constant current of 0.2C, and continue charging to a current of 0.01C
Discharge cut-off voltage

57.5V

0.2C constant current discharge to cut-off voltage
Maximum charging continuous current

150A

Continuous charging mode
Maximum discharge continuous current

200A

continuous discharge mode
internal resistance

≤68mΩ

Measure both ends of the battery leads after assembly

Charging temperature

0℃~55℃

0~85%RH

Discharge temperature

-30℃~60℃

0~85%RH

Battery pack size

1000*385*265mm

-----

Battery pack weight

159KG

Battery pack product weight

 

ashdff
 
 

Trustworthy lithium battery solution provider

The battery PACK production line adopts advanced MES production execution system, professional production equipment, more than 200+ independent laboratories, and nearly 30+ experimental equipment.

 
R&D capabilities

Provide customized battery products

 
15+

years experience

 
Solid quality

Offers industry-leading 6-year warranty and global technical support.

 
Strict quality control

100% full inspection, worry-free shipment, high and low temperature, vibration test, all-round inspection

 

 
Product Advantages
 

With higher energy density and more stable discharge performance, it offers 50% longer battery life compared to lead-acid batteries.

01/

Energy density is about 150-400Wh/kg, which is 3-8 times that of lead-acid batteries (30-50Wh/kg)

02/

Smaller volume and weight under the same capacity

03/

Each batch undergoes strict quality control.

04/

No memory effect

05/

Support high rate charge and discharge

06/

Consistent Power Output.

 

Application & Compatibility

 

 

 

1. Low-speed vehicles, two-wheelers, three-wheelers, electric motorcycles

modular-1
 
 

Lithium battery solutions

 
Lithium battery solutions

OEM/ODM customized processing can meet diversified customization needs, establish long-term strategic cooperation with many well-known companies, have quality assurance, and have a complete traceability system.

 

Safety & Compliance

 

Our Lithium Battery meets the highest safety standards and industry regulations.

 
01
 

High rate battery

Low internal resistance, continuous high current discharge

 
02
 

Good safety performance

8 layers of safety protection ensure battery stability

 
03
 

Long service life

5-year warranty, over 2,000 charge and discharge cycles

800800

 

6116158
 
CORE COMPETITTVENESS
 

terative technology makes better battery packs

High Energy Density Battery Technology

Modular Design

Battery Management System Certifications

Environmental Adaptability Tests

 

WHY CHOOSE US

 

Supplier assessment procedures

The data is from on site check of the latest
inspection report assessed by independent third parties.

Quality management certified

Suppliers who pass Quality Management
System Certification, and have onsite
materials or finished products inspected,as certified by independent third parties.

WHY-CHOOSE-US

Design-based customization

The data is from past contract of the latest inspection report as assessed byindependent third parties.

On-site material inspection

The data is from on site check of the latest inspection report assessed by independent third parties.

 

 

Charging Precautions

 

The original charger must be used for charging. It is strictly forbidden to use lead-acid battery chargers or other incompatible chargers. You will be responsible for any damage or safety accidents caused by charging.

When charging, do not directly contact the positive and negative terminals with metal or short-circuit the charging port.

During charging, the charger may generate heat; as long as the temperature does not exceed 60℃, it is considered normal.

The battery must be charged within 24 hours after it is fully discharged, and the charging time should be at least 3 hours.

Please charge the battery within the range of 0℃-40℃. Charge as needed. If the battery pack needs to be stored for a long time, please charge the battery pack to 40%-60% of its capacity (after discharging, charge for 2 hours using the dedicated charger according to the instructions). Store in a dry, ventilated place and charge for 2 hours with the charger every month.

Supplementary notes and precautions

 

Avoid exposing the battery to water, beverages, and corrosive liquids, as this may cause leakage, overheating, smoke, fire, and explosion. If the battery gets wet or is damaged from a fall, stop using it immediately.

Avoid placing the battery near heat sources, open flames, flammable and explosive gases or liquids, as this may cause the battery to leak, overheat, smoke, catch fire or explode.

If a foreign metal object enters the battery compartment, it may cause the battery to leak, overheat, smoke, catch fire, or explode.

Do not store the battery in an environment above 40°C, as this will cause unnecessary capacity degradation and safety issues.

Our company will not be held responsible for any battery malfunctions caused by prolonged undercharging due to failure to recharge the fully discharged battery in a timely manner.

If a battery catches fire, prioritize personal safety and extinguish it correctly. First, move surrounding objects away; if there's no time, use a long shovel to move it to an open area to avoid increasing the risk of an accident. It is recommended to cover the fire with sand, use a fire extinguisher, or move it to a large bucket of water with a shovel.

 

 

 

 

 

Shipping & Transportation

 

 

 

10

Certificate

 

 

11

11

 

FAQ
 

How long frequency does recharge the battery?

Usually per 3 months to recharge the battery pack , to charge full the battery depends on the charger current you use. 20A charger can charge full for 12V 100Ah battery in 5 hours, fast charger 50A in 2 hours.

What's the sample lead time, and bulk order delivery. How long I can get it?

Fast delivery: If small quantity, can be finished in 3-5 days days after payement, bulk in 10-25 days depends on the quantity.

What is your warranty?

We offer 10 years warranty for all our battery pack for different situation. We ensure at least 6000 cycle life for the
LiFePO4 battery pack, which means you can use it for at least 10 years for normal 1 time charge and discharge everyday.

Can I customize the size of battery?

Of course yes if your quantity MOQ workable.

Can we put different LiFePO4 battery pack in parallel or series by ourself?

Yes. The battery can be put in parallel or series by customers. But there are few tips we need to pay attention;
1> Make sure the voltage of each battery are same before put inparallel. If they are not same, charge them to the same rate.
2> Don't not put discharged battery and undischarged battery in parallel. This may reduce the capacity of the whole battery pack.
3> Advise us the target capacity of the whole pack if you would like to put them in series. We will choose the suitable BMS for each battery.
4> If you are not professional in parallel and series batteries, please don't handle the battery by yourself. It may cause danger and hurt the cycle life of battery.

Hot Tags: lithium phosphate battery, China lithium phosphate battery manufacturers, suppliers, factory, high cranking amp motorcycle battery

 

Send Inquiry